- Fits:
- HONDA NC700X 12 (Except DCT) *Processing to drill switch hole required|*Essential side cap (for 18mm diameter)
- HONDA FTR223 (with side numbers) *Processing of switch holes required
- SUZUKI GRASS TRACKER 09-12 09-12(FI cars)*Side caps can be used with the stock ones.
- YAMAHA TW200E -99 (drum brakes)
- YAMAHA TW200 -99 (drum brakes)
- ...and more.
2012년 CB1100 의 순정 대체품으로 허리케인 유로피언 타입3 핸들바를 장착하였습니다.
개인적인 생각으로 혼다 순정품보다 더 퀄리티가 좋다고 생각했습니다. 다만, 스위치의 구멍의 위치를 선정하는 것이 조금 어려웠습니다.
가장 안심이 되었던 것은 케이블의 교환 없이 설치가 가능한 점입니다. 교환 후에 포지션도 더 편하고 강력하게 추천합니다.Read More - Fits:
- HONDA NC700X 12 (Except DCT) *Processing to drill switch hole required|*Essential side cap (for 18mm diameter)
- HONDA FTR223 (without side numbers) *Processing of switch holes required
- HONDA CB400SS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- SUZUKI GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
- SUZUKI GRASS TRACKER Big Boy -08-8(carburetor) *switch hole drilling is required|* You can use stock side caps.
- ...and more.
Hurricane Tracker Special Handlebar makes for a really good stock replacement bar.Today I Installed Hurricane handlebar on my TDub. Premium Quality Handlebar Right here.finishing quality is awesome .W...Read More - Fits:
- HONDA NC700X 12 (Except DCT) *Processing to drill switch hole required|*Essential side cap (for 18mm diameter)
- HONDA FTR223 (without side numbers) *Processing of switch holes required
- HONDA CB400SS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- SUZUKI GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
- SUZUKI GRASS TRACKER Big Boy -08-8(carburetor) *switch hole drilling is required|* You can use stock side caps.
- ...and more.
By NO NAME (9)it's product excellent. my motorcycle is mor beautiful and more complete. fast shipping. but little bit expensive. thank you.Read More - Fits:
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E -99 (drum brakes)
- YAMAHA TW200 -99 (drum brakes)
- Others Universal
- ...and more.
It was not suitable for me, although it is a part that cannot be helped because it is something that cannot be understood until it is put on.The atmosphere is that of a family car.I thought it was too...Read More - Fits:
- YAMAHA TW200 -99 (drum brakes)
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E -99 (drum brakes)
- SUZUKI GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
- ...and more.
Changed by adjusting Riding positionIt depends on your preference, but I am much more comfortable and can handle Touring and city driving at all.The OEM width and height are well within the vehicle in...Read More - Fits:
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E -99 (drum brakes)
- YAMAHA TW200 -99 (drum brakes)
- SUZUKI GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
- ...and more.
Handlebar width is just right.OEMs had a wide range, and the Image of off-road motorcycle remained strong.This HURRICANE POLICE 3 model is black in color and has an easy to ride position, and I think ...Read More - Fits:
- HONDA FTR223 (with side numbers) *Processing of switch holes required
- HONDA CB1100 -12 SC65 (except for the up-handed model ABS vehicle)
- HONDA CB1300SUPER BOLDOR 10-12 *Processing of the switch hole drilling is required|*Processing of the side cap (for the inner diameter of 18mm) is required
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- ...and more.
Even without the OEM Handlebar Bracket, the HURRICANEPOLICE3 is just the right height and squeezes inward to achieve the optimum position for a natural posture. I like it for myself.Read More - Fits:
- HONDA NC700X 12 (Except DCT) *Processing to drill switch hole required|*Essential side cap (for 18mm diameter)
- HONDA FTR223 (without side numbers) *Processing of switch holes required
- HONDA CB400SS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- SUZUKI GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
- SUZUKI GRASS TRACKER Big Boy -08-8(carburetor) *switch hole drilling is required|* You can use stock side caps.
- ...and more.
Excelent...fast delivery viet nam, its worth your car ,more halloween gifts for the kids. I will order more next time...Read More - Fits:
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E -99 (drum brakes)
- YAMAHA TW200 -99 (drum brakes)
- Others Universal
- ...and more.
[How is it used?The width of the OEM Handlebar of 250TR was too wide and it was difficult to ride, so I replaced it with this product.Was the one you received as per Image?It was an inexpensive produc...Read More - Fits:
- HONDA HORNET250 96-02
- HONDA CB1100 10
- HONDA CB1100 10 Type II
- KAWASAKI ZEPHYR750 90-06
- KAWASAKI ZRX400 95-04
- ...and more.
I bought this one for dress-up purpose of HORNET250.The Position is slightly different from the OEM, but it's only an error level, so I couldn't tell much…The texture was so tasteful, it didn't feel c...Read More - Fits:
- SUZUKI GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
- YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID)
- YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID)
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- ...and more.
So far, I had installed an ez-fit bar for the zrx1200r, which I happened to find on sale cheap, because I wanted to make the Handlebar black. This bar was a replacement for the Hardy Load Bar medium, ...Read More - Fits:
- YAMAHA TW200E -99 (drum brakes)
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200 -99 (drum brakes)
- Others Universal
- ...and more.
The European 2 model I was using before I bought this car had a wide aperture angle and my driving posture was leaning forward.Read More - Fits:
- HONDA CB1100 -12 SC65 (Uphan model)
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E -99 (drum brakes)
- YAMAHA TW200 -99 (drum brakes)
- ...and more.
I didn't like the wide handlebar of NORMAL, so I tried the standard Conti2 but it didn't fit me and I felt stress. It is not a special model of car, so the wires are still OEM and Large, but I had to ...Read More - Fits:
- HONDA NC700X 12 (Except DCT) *Processing to drill switch hole required|*Essential side cap (for 18mm diameter)
- HONDA NC700S 12 (except for ABS and DCT cars) *Processing of switch hole is required|* Required side cap (for 18mm diameter)
- HONDA FTR223 (with side numbers) *Processing of switch holes required
- HONDA FTR223 (without side numbers) *Processing of switch holes required
- HONDA CB750 04- RC42 *Processing of switch hole required|* Required side cap (for 18mm ID)
- ...and more.
It is easier to work with CenterMark for positioning and Memory for angle adjustment, butI was able to work with BrandSeal as a landmark.Read More - Fits:
- YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID)
- YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID)
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E -99 (drum brakes)
- ...and more.
The OEM Handlebar on the ELIMINATOR 250 was bent, so I looked for something similar to the OEM.This is almost the same as OEM etc. Of course, there is no hole in the Switch box, so some kind of modifi...Read More - Fits:
- HONDA NC700X 12 (Except DCT) *Processing to drill switch hole required|*Essential side cap (for 18mm diameter)
- HONDA FTR223 (without side numbers) *Processing of switch holes required
- HONDA CB400SS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- SUZUKI GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
- SUZUKI GRASS TRACKER Big Boy -08-8(carburetor) *switch hole drilling is required|* You can use stock side caps.
- ...and more.
HURRICANE HURRICANETrucker special Φ7/8 inches Handlebar Steel was needed for this one, so I bought it.I think the quality of the product is reasonable for the price rangeIt's safe to say that you won...Read More - Fits:
- YAMAHA TW200 -99 (drum brakes)
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E -99 (drum brakes)
- SUZUKI GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
- ...and more.
The STD Handlebar on the CB400SF is surprisingly tilted forward, which is hard for touringSo I chose this one, which has a Japanese Vehicle Inspection Correspondence (height and width) and the apertur...Read More - Fits:
- SUZUKI GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
- YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID)
- YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID)
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- ...and more.
I wanted to move the Handle position up and back a little bit, so I changed from the RENTHAL that I had been using.My impressions with it are...maybe a little too Upright...after all, the BMConti3 mod...Read More - Fits:
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E -99 (drum brakes)
- YAMAHA TW200 -99 (drum brakes)
- Others Universal
- ...and more.
I put it on the ZOOMER!The STD Handlebar is a bit awkward for women to drive, so we went with this Handlebar. (^^)It makes driving so much easier!If I had to say, I would have made the Handlebar a lit...Read More - Fits:
- HONDA CB1300SUPER BOLDOR 10-12 *Processing to drill the switch hole is required|*Modification of the side cap (for 18mm ID)|*Required to change the brake hose.
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E -99 (drum brakes)
- YAMAHA TW200 -99 (drum brakes)
- ...and more.
I used it for tw225.The bar in the middle is a cool handlebar.Position is just right, and this is a usable handlebar.For earthy VINTAGE.Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING