Although it was the change which the Body cover which was being used before avoids, in an article like tent cloth, rain sank in and former one became useless in one year.There are only goods of a DAYTONA and it is [ the bottom ] satisfied with structure firmly this time.Rain is also flipped and it is a full Shutting out.The Size of a Size suits also to Buell S1W which is in Honda PCX one more set by an Exactly by L, and it is killing two birds with one stone.
Fits: HONDA BENLY CD125 , HONDA CB223 , HONDA CBR250R ABS [MC41] 17, HONDA CBR250R [MC41] 17, HONDA CBR250RR ABS 2BK-MC51 17-21
I bought the Motorcycle Cover when I bought my new Ninja 250 I use it, but I don't have to worry about the motorcycle tipping over in strong winds or anything like that, because of the force of the wind You will not be agitated
A friend of mine bought a cheap Cover and used it for a few months to see if the durability of the Cover itself is sweet The Motorcycle was tipping over due to unraveling of the thread at
Even with these comparisons, I'm glad I bought a Cover made by DAYTONA
Also, since it has been used for about three years, the stains and fading have become noticeable, so the same Buy a new one made by DAYTONA
As for the shortcomings, the Belt, which is just fixed to the middle side, melts with the heat of the exhaust pipe and all
I'd like you to use a hard-to-melt material here I have no choice but to cut and sew the melted part with Scissors and wrap it with heat-resistant Tape This is the way to fix itView Detail
Fits: HONDA BENLY CD125 , HONDA CB223 , HONDA CBR250R ABS [MC41] 17, HONDA CBR250R [MC41] 17, HONDA CBR250RR ABS 2BK-MC51 17-21
Since I used to use it before, I was satisfied with the cost, so I replaced it with a new one as a result of transferring Motorcycle.
But when I use it, the white dirt spotted on Motorcycle the next day after rain. Apparently water sticks to the back of the fabric so that something stains and it is a pattern that sticks to the car body. Due to the way of placement, adhesion to the body Right Side that is in contact with the fabric is remarkable.
What we are bad is that it can not be removed by this dirt wiped. When attached to the Gold genus, water wipe can not be dropped by Parts cleaner etc., of course, it will only be scraped off with Compound or Gold genus Brush.
Moreover, in our Motorcycle, a stainless steel part of the Exhaust System stainless steel part is stained, and it is possible to finally drop off with PIKAL. It took a lot of labor at these treats.
And as it rains again, the same dirt will be attached as easily. I pass something coming to mind, I feel bad.
Since I did not have this when I was using in the previous Motorcycle, I do not know if only recent lots are like this or just me.
I will never repeat it again as I have experienced such a thing.View Detail
Fits: HONDA BENLY CD125 , HONDA CB223 , HONDA CBR250R ABS [MC41] 17, HONDA CBR250R [MC41] 17, HONDA CBR250RR ABS 2BK-MC51 17-21
2017 / 10 / 29 purchase, 2018 / 4 / 9 I write now..
KomineAK100 became rumbled and changed it to this. Although compared with AK100,
Nice thing
cheap
Quantity : 1pc. It is made of cloth and it is easy to fold when wearing it on Motorcycle or after removing it
There is a storage bag in Body but water can not be stored inside (AK accumulates)
Waterproof firmly until the hole is empty
bad place
There are holes already here and there, water enters (AK had a little over a year in the same environment)
The rope for fixing the hood touches the exhaust pipe, just before it melts and breaks (Passes Tape Guide
There are few, the position is bad)
Because it is about half the price of AK, is it about half the life span.
Heat resistant Material is partially used so that it does not melt even if the Exhaust System touches it,
It is raising the durability of stacking and the hover fixing guide is considered, and personally quality
Next time I will buy AK.
It is used in rainy day, sunny place, but if the environment changes slightly
It may last long.View Detail
Fits: HONDA BENLY CD125 , HONDA CB223 , HONDA CBR250R ABS [MC41] 17, HONDA CBR250R [MC41] 17, HONDA CBR250RR ABS 2BK-MC51 17-21
It is Exactly to klx 125.
Purchased by rain and crime prevention measures.
In my Size notation, my Motorcycle did not fill in so I was at a loss, but I could use it without problems.
Before and after Wire locketc. It is also possible to tighten the hole through which it passes, and the slack in the lower part, so it does not shimmer even if the wind blows.
If there is only one, I do not know the folding method is complicated.View Detail
Fits: HONDA BENLY CD125 , HONDA CB223 , HONDA CBR250R ABS [MC41] 17, HONDA CBR250R [MC41] 17, HONDA CBR250RR ABS 2BK-MC51 17-21
I purchased it at the service purchase when purchasing a new car, but purchased it because another Bike Cover got damaged! Although I was using while buying a cheap guy, this product is currently in use, It has more than three years, torn etc etc. I chose this because there is no pain! As myself it is highly recommended!View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING