-
Reviews
-
This item is affordable. But I gave it a try becau...
This product has been removed or currently not available.
Very Good
This item is affordable. But I gave it a try because this is (probably) made in Japan, low starting voltage, and less power consumption than the original lamps.
My VTR-F doesn't have good power generation capacity and I also wanted to set off power consThis item is affordable. But I gave it a try because this is (probably) made in Japan, low starting voltage, and less power consumption than the original lamps.
My VTR-F doesn't have good power generation capacity and I also wanted to set off power consumption of grip heaters that I had installed by myself.
I also expected more stable power supply after starting the engine or during idling.
This product does not have an explanatory leaflet. So I recommend that you should work with an experienced person. This time, I didn't need an extra modify but had to consider where and how to install the product.
It depends on a bike, but the introduction statement "you can install in 10 minutes" seems overstated to me.
In my case, I fixed the ballast with bolts to the stays behind the upper cowl. I also used tie-wraps for more reinforcement.
I use H4 HID for the first time. The metal cover slides vertically to select HI or LOW. So, it seems there is no bad responsiveness of switching H7 bulbs.
I expect that this slide mechanism will not break.
As actual usage impression, the bulbs are brighter when I lower the power than the original settings and I am satisfied with the brightness because original bulbs are not basically bright enough to almost all the bikes.
The light distribution spreads a little upper side.
When I use the low bulbs I can see traffic signs very clearly.
I can't say anything about durability so far.
I wish it had a simple explanatory leaflet.
As long as I searched the internet, the manufacturer is said to provide you a leaflet if you ask.
So I think this information should be stated in the product descropution.
Overall, I think this product has good value for money.
Reviews For Current Product From Other Webike User
Poor
Cutline does not appear properlyRight's Valve is made by JAFAST. Because of the position of the light shield plate, glare is terrible.
Regarding Shade, it is different from publicity photo. It is a common thing appearing in Yahoo auction.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING