37.64 USD
(5,693 JPY)
3.5 (2 Reviews)
rating breakdown
5 Stars |
|
0 |
4 Stars |
|
0 |
3 Stars |
|
0 |
2 Stars |
|
0 |
1 Stars |
|
0 |
Very Good
Size is difficult to chooseRecent rough & Road's Gloves seems that the size table and the finished product are different. A few years ago I was Exactly at L Size.
If I match the Size of my hand against the Size table, it is M Size or L Size, but I thought I ordered LLSize. Result The thumb was stuck and the rest of the fingers got a little more. The palm was just right, so it was a result.
When purchasing rough & Road's Gloves through mail order, I think that it is good to purchase One size size after trying on somewhere..
Impre is a thin material as the product phrase, so the heat of the Grip heater is easy to transmit.
However, due to the material on the back side of the hand, I feel a little bit stuck when hands are handed in and out to Handlebar Cover, but I think that it is a problem of familiarity.
Most Viewed Reviews Of ROUGH & ROAD Fall / Winter Gloves
Excellent
舒适的冬季手套这款在webike购买的ROUGH & ROAD 防护用冬季手套,采用小牛皮制作,内衬是羊毛材质柔软亲肤,佩戴感觉很舒适碳纤维指关节垫和腕部垫子可以保护手腕和手指,操作智能手机也是毫无问题。View Detail
Very Good
just retro style leather gloveI bought this one matching for my retro bike. Leather quality is good but remind you that there is no protection such as knuckle and fingers. It's just good enough for wind protection. I don't think it's warm enough for winter though. It's loose fit glove so quite comfortable for moving fingers.View Detail
Excellent
舒适性不错的骑行手套很巧合的一次机会知道了这个网站,一起的朋友也有在用的,都说不错,抱着试试看的心理下了一单,经过一段时间的等待,终于收到海关清关的信息,收到包裹后,迫不及待地打开,质地做工和想的差不多,耐久性还有待检验,戴上操作机车手感很好,没有太厚重的感觉,最近温度还好,不知道-18度的时候怎么样,搭配黑色车,特别帅。----------------------------------------------It was a coincidence that I know webike, and my friends also webike's user, and they all said it was good.I try to place an order and after a period of waiting, I finally received the package and then couldn't wait to try it out. The product quality is expected my mind, the durability is yet to be tested, When I wear it and control my motorbike, it didn't feel too thick and heavy. The weather has been pretty good lately, i not sure how it will be when it's -18°, it looks cool matching the black color motorbike.Powered by Google TranslatorView Detail
Very Good
So-so warmI purchased the One sizeLarge Kii XL, although there was plenty of room in the LL It's not a hindrance to operation and it's fine unless it's early morning in the middle of winter When it's really cold, I use the Inner Gloves to keep me warm For a little more money I could probably get something warmer but I'm sure I'll be able to get the same for next season I thinkView Detail
Very Good
I'm happy with the ease of operation, even at Protection in cold weatherI was looking for a long hem that would allow the sleeves of the jacket to be inserted As a result, I found a design with good parenthesis and protection I've decided on this one, which seems to satisfy my greediness for smartphone operation support and waterproofing, etc
The only thing that's different is that Inner If you want to use the Gloves, you may want to go up a size if you want to use the Gloves because there is less room There is a belt to squeeze your wrist and the Wear sleeve is also in as requested If not, the wind will come in through the sleeves In addition, there is a windshield wiper rubber around the left thumb for when it rains It's attached I haven't had a chance to use the windshield wiper yet, but it's a great piece of equipment
The operation of my phone works and doesn't work Is it just me?
When you drive it, the controls are good and you don't feel uncomfortable even though it's your first time
Short touring in temperatures of around 5 degrees Celsius (about 30?) one way, my fingers can't help but sting It comes cold, but not bitingly so, and my palms are warm enough
When the temperature reaches about 0 degrees Celsius, it becomes numb, but at that point there is a possibility of freezing Riding a motorcycle is risky If you want to use it for long distances and low temperatures (around 0°C), you should use a Handlebar Cover or Grip It is preferable to use it together with a heater
I felt it was good enough to run a motorcycle in cold weather, not in extreme conditions, but in the city I did I think it's an expensive product, but I was very satisfied with TotalView Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING