Large capacity tarpaulin bag 50L-80L.
The STREAMTRAIL DRY TANK DX can be simply held on the DRY-X3 using the shoulder belt.
We are also planning to develop the Pro Series of assistance bags in collaboration with Stream Trail that can be used with the DRY-X2 and 3.
Simple and functional, this is the direction in which Kemeko Touring customization aims.
The DRY-X3 was born for the purpose of packing all camping equipment, such as fuel, tents, sleeping bags, mats, which are not brought down to the site, and for the purpose of base-packing with a single strap, it no longer has a shoulder belt, but only a power handle.
The bottom rail, which is several times stronger than the DRY-X2, maintains its shape even during loading and unloading.
This is a product aimed at the professional standard camping tourist.
Professional standard old style is the new!!!!
| | | ■Equipped with 4 top and bottom buckles and 8 D-ring on each side.
Vertical compression and the possibility of binding tents, tripods, large chairs to the Dry-X 3 body.
The 1500mm long compression binding straps can be used in a variety of ways, giving the user a significant advantage.
■To make the most of the 14 D-ringvas, you can use the buckle of the compression belt.
The structure reminiscent of the early DRY-X models requires the user's wisdom and allows the user to enjoy the packing itself. | | This image compares the difference in the way the strap is threaded through the left and right buckles. This is a hint for users. We can see that the left side is theoretically free and the right side is free. | |
| | | ■You can use 14 D-rings effectively by crossing the strap as shown in the image if it is stored within the reach of a 1500mm long strap.
*Packaged in the smallest size
| | ■The extra strap shown in the image below is simply for fun when used at this size!.The amount of space can be changed depending on the type and amount of cargo to be carried.
*Minimum size packed | |
| | | ■This is the bottom with the outer perimeter rounded.
If you want to fix your luggage on the outside of the DRY-D3, you can change the routing to create an extra compression belt.
*Packed at minimum size | | | ■ Turn the knob before and after compression to release it. It is equipped with a locking air valve that makes it easier to release the air inside. Pull the compression belts and close them when the compression is complete.
| |
| | | ■ Single Strap 2 makes it incredibly easy to load your seat or carrier.
If there is an absolute shortage of hooks on the bike, we can advise on countermeasures and are currently developing universal hook parts for the bike. | | < td width="10px">■Image shows the DRY-X3 with a folded L-size fleece blanket (1550 x 1750 mm) inside, with 10 sheets stacked on top.As you can see, there is still some room. On top, our SHEDE25 tent (for 2.5 people) and folding table are fixed with compression binding straps.
Due to the side compression belt, the minimum capacity is about 50L and the maximum is about 80L. Later options will allow you to lower the minimum capacity even further. | |
| | | ■Basepacking with Single Strap 2 before using the binding straps for sheet packing.
Once you have secured the bindings firmly, use the compression binding straps to bind the top of the bindings.
In the end, it will be covered by a net as a packing process as shown in the image.
*The image on the left shows the seat packing of DRY-X2(40L) and Mega Mouth.However, there is a limit of the size of the strap attached to the Mega Mouth.The DRY-X3 cannot be connected to the MAX. |