Once you select the option, estimate delivery time will be displayed.
*Shipping date and Estimate time of arrival are not guarantee.
Once your orders are placed, we will check the stock of manufacturer and send you the confirmed Shipping time via e-mail.
[Material] Aluminum [Size] Width: 734mm Height: 83mm Depth (pull): 159mm Handlebar outer diameter: Φ22.2 Handlebar inner diameter: Φ14 Standing angle: 49 degrees Aperture Angle: 22 degrees Stock ratio: 7mm down / 1mm back [Weight] 530g [Specification] Hole machining: Switch hole machined Clutch Cable (Hose) Fitting: Available Throttle cable compatibility: Available Brake hose fitment: Available [Country of manufacture] Japan
*The bar ends are not included in the product. *Stock handlebar weights cannot be used, handlebar weights for each type (for aluminum handlebars / for steel handlebars) are available. *The brake hose and cables do not need to be replaced. *Stock handlebar ends will not work.
* The image is only for reference. The image shown may differ from the actual product.
・About Plus Original design handle with 7mm lower/ 1mm forward, 7mm wider/ 2 degree aperture angle added compared to the stock handle. The wide, low handlebars provide a compact, easy-to-control position. The material used is aluminum with excellent flexibility. No cables to change.
The design is based on the stock handlebar shape, but the grip part has been shifted in parallel.The angle is the same as the stock one, so you can form a good riding position without damaging the image.
●Original design handle for EFFEX models Available on large global models such as adventure and cruiser models.The original design handlebars are based on the stock design, but within the reach of the stock hoses and wires for a better riding position.
●No need to replace cables It is designed for exclusive use of the model, so you don't have to worry about compatibility. *Depending on the model, it may be necessary to change the minimum cable routing. *For "High", it may be necessary to replace the cables.
●Switch hole machined You no longer need to worry about positioning and preparing tools, and you no longer need to spend extra money. *Some models may not have a switch hole.
●The lever holder can be shifted to the left or right The mounting straight line is designed to be about 5mm longer. The grip position of the lever can be fine-tuned. Bolt-on handlebars for specific models The design is based on the stock handlebar shape, but the grip part has been shifted in parallel. The angle is the same as the stock one, so you can form a good riding position without damaging the image.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!