- Fits:
- KAWASAKI ZRX1200 DAEG
- KAWASAKI GPZ900R -A6
- KAWASAKI GPZ900R A7-
- KAWASAKI Z900RS
- KAWASAKI Z900RS CAFE
The surface is very clean, and the installation is very easy.
Fasten the enclosed bolt to the swing arm.
The surface is smooth and beautifully finished
It looks strong enough.
The lift requires a spoo...Read More - Fits:
- HONDA CB1300 SUPER BOLDOR 06-07
- HONDA CB1300 SUPER BOLDOR 08-13
- HONDA X-4
- HONDA CB1300SF 03-04
- HONDA CB1300SF 05-07
- ...and more.
The left and right sliders are very light and neatly injected.
It's simple to install it by putting it in the left and right holes of the front axle.
I have z900rs, but I changed the front suspension ...Read More - Fits:
- HONDA MONKEY125 19-21
Slider fitment can make the front lower part look more solid and fuller.
insurance that will protect against unexpected damage. Read More - Fits:
- KAWASAKI KLX230 19
At first I tried to buy the zeta one but they didn't have it in stock so I went with this one.However, since it is an air-cooled engine, there is no need to protect the water pump or hose, and it seem...Read More - Fits:
- KAWASAKI Z900RS CAFE
- KAWASAKI Z900RS
I installed it on my Z900RS 50th as a part of dress-up rather than as a fork slider. The color match with the gold wheel very well and it was a large success. It looks very Parenthesis.Read More - Fits:
- YAMAHA FZ1 FAZER 06-08
I put it on my FZ1FAZER. engine slider is to cover the engine when it rolls over, so the fashionability may be secondary, but I think it should be cool if I put it on. KFACTORY's Slider comes with a s...Read More - Fits:
- SUZUKI KATANA 19-21
I bought it not only because of its function as a Slider, but also because I liked the way it looked.I like the look of the KATANA because the front fork is Gold for the 2022 model year, so it has a M...Read More - Fits:
- YAMAHA SEROW250 18-
- YAMAHA SEROW250 08-20
引擎護板物質良好,字體美觀,配件螺絲充足,有說明書參考,安裝亦容易,但是有膠紙幫助加裝螺絲會更好,亦希望新品有保護貼紙,避免手指模印在護板上,還有板前方加長一點,防止引擎污垢,整體上是美觀,越野車是需要的.
----------------------------------------------------------
The engine guards are good, the...Read More - Fits:
- KAWASAKI ZRX1200 DAEG
This axle slider is of exceptional build quality. Packaging is exquisite. Fit and finish is top notch! Design very beautiful in form and function. I like the way they anodise the metal on this set. Ni...Read More - Fits:
- YAMAHA V-MAX1200 -08
Only the bottom two parts are coming.If you think you can buy what you see in the picture, you're out of luck.If you don't change the photo, it's a scam.Please replace the photo ASAP.Read More - Fits:
- KAWASAKI Z900RS CAFE
- KAWASAKI Z900RS
Color as per Image?Would you like a little more size upVERSION?Read More - Fits:
- HONDA CB400SF Revo 08-16
- HONDA CB400 99-15
- HONDA CB400Super BOLDOR Revo 08-15
- HONDA CB400SF VTEC 99-07 (SPEC1-SPEC3)
Fitted on my Cb400 Revo 2021 item fitted perfecly not only its nice but give adequate protection. Quality is equally to its price. Anti loose bolt is given to keep slider intact!Read More - Fits:
- KAWASAKI Z900RS CAFE
- KAWASAKI Z900RS
I chose something as inconspicuous as possible, and the small size is good without being obtrusive.I won't know the effect until I fall...but it seems to protect the Engine itself.Clutch cover is not ...Read More - Fits:
- KAWASAKI ZX-25R
For vehicles equipped with OEMSlider, it can be removed and simply attached.Side cowl can be removed without removing it.Dress-up even a rugged slider by attaching an Emblem to the slider, and the pri...Read More - Fits:
- KAWASAKI Z250 13-17
- KAWASAKI NINJA250SL
- KAWASAKI Z250SL
- KAWASAKI ZX-10R 04-05
- KAWASAKI NINJA250 13-17
- ...and more.
The ZZr1400 has a center stand, so it is unnecessary to say that it is unnecessary. After riding for a long time, you may want to add or change some new parts.The quality of K-FACTORY's Stand Hook is ...Read More - Fits:
- KAWASAKI Z900RS CAFE
- KAWASAKI Z900RS
I chose K-FAQ for the Front Axle Slider and Engine slider, so I chose the same manufacturer for the Stand Hook.The price is Quantity:Pair (for Left and Right) It will beI realize that the price is a b...Read More - Fits:
- HONDA MONKEY125 19-21
I was able to install it successfully using the KITACO front axle shaft.I feel like I'm on the edge with the KITACO Nut. I think I'll replace it with the supplied Nut.It will definitely protect the ca...Read More - Fits:
- KAWASAKI ZRX1100
- KAWASAKI ZX-12R -01
- KAWASAKI ZX-12R 02-06
- KAWASAKI ZRX1200 -09
Looks are important! The texture is as good as it gets.Now we just need to figure out how durable the Gold alumite is!The Axle Shaft is hollow, so it's a good item for plugging holes, and it's a recom...Read More - Fits:
- KAWASAKI Z900RS CAFE
- KAWASAKI Z900RS
Purchased for a complete dress-up.As expected, the Gold One point works better than the picture shows.The price seems to be high, but it is not something to be replaced so often. I can't help it becau...Read More - Fits:
- YAMAHA SEROW250 18-
- YAMAHA SEROW250 08-20
For anyone in the U.S. with a California version of the XT250 (smog cannister), this is the skidplate you want and fits perfectly w/o having to move cannister. And wow Webike! Order this late Wednesda...Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING