- Fits:
- YAMAHA SR400 01-17
SR400FI 유저입니다. 기존에 허리케인 핸들셋 이용중에 포지션 변경으로 위 핸들바를 구매했었습니다. 지금은 SR500 오리지널 핸들바로 교체하였으나 그전까지 문제 없이 사용하였고 가격 대비 퀄리티는 나쁘지 않다고 생각합니다.Read More - Fits:
- YAMAHA
- KAWASAKI
- KAWASAKI
Very happy with this product, these handlebars have a very comfortable riding position on my Royal Enfield Classic 500. I would order againRead More - Fits:
- その他 Universal
- YAMAHA SR400 19-21
- YAMAHA SR400 19-21
Wider and higher then stock bars so is much more comfortable and also looks much better in my opinion.
Fits well with +150mm longer cable sets and a 900mm brake hose. Electrical harness not need to b...Read More - Fits:
- SUZUKI ST250 -07 NJ4AA Carburetor *switch hole drilling required|*Side caps can be used for stock.
- SUZUKI ST250 E Type -07 NJ4AA *Processing of switch holes required|* Normal side caps can be used.
- SUZUKI RV200 VANVAN -07 NH41A Carburetor *Processing to open switch holes required|* The stock side caps can be used.
- KAWASAKI BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- HONDA FTR223 (without side numbers) * Requires modification of the clutch cable and choke cable.
- ...and more.
Timing was not available for Tommaselli, so I bought it in timeThe looks and Position are great, but … it won't pass inspection. wRead More - Fits:
- YAMAHA SR400 19-21
- YAMAHA SR400 19-21
Used for TS250 RestoreRead More - Fits:
- SUZUKI GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used.
- KAWASAKI BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYR750 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYRX *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYR750 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- ...and more.
[How is it used?I changed XJR400R from OEM Handlebar to this Condor Handle.Was the one you received as per Image?The precision of the construction is good and the shape is cool.Was the installation di...Read More - Fits:
- Others Universal
- SUZUKI GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
- SUZUKI GRASS TRACKER Big Boy -08-8(Carburetor)*Drilling of switch hole is required|*You can use stock side cap. |*It is necessary to change the direction of the throttle cable
- clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
- SUZUKI GRASS TRACKER 09-12 (FI car)*You can use stock side caps.
- ...and more.
Not a lot you can say about handlebars. They look good and seem to be of a high quality, time will tell. However there are a few points worth mentioning. There is a manufacturers sticker where the gri...Read More - Fits:
- SUZUKI GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used.
- KAWASAKI BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYR750 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYRX *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- KAWASAKI ZEPHYR750 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
- ...and more.
Separate Handlebars were out of stock, so I put the Condor Handle on backwards and tilted it forward. It is very forward leaning and narrow, so I think it will be strange to use Large until I get used...Read More - Fits:
- Others Universal
- SUZUKI GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
- SUZUKI GRASS TRACKER Big Boy -08-8(Carburetor)*Drilling of switch hole is required|*You can use stock side cap. |*It is necessary to change the direction of the throttle cable
- clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
- SUZUKI GRASS TRACKER 09-12 (FI car)*You can use stock side caps.
- ...and more.
I replaced Handlebar to immeChain.The height of the handlebar is now much lower.It's so much easier to ride.Read More - Fits:
- YAMAHA XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter)
- YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID)
- YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID)
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- ...and more.
I put it on my st250, but the OEM handlebar made me look awkward when riding.The quality is not luxurious, but it feels solid!Read More - Fits:
- HONDA FTR223 (without side numbers) * Requires modification of the clutch cable and choke cable.
- HONDA CB750 04- RC42 *Processing of switch hole required|* Required side cap (for 18mm ID)
- HONDA CB400SF 99-07 NC39 VTEC *Processing of the switch hole is required|* Required side cap (for 18mm ID)
- HONDA CB400SUPER BOLDOR 05-07 NC39 *Processing of switch hole required|* Required side cap (for 18mm diameter)
- HONDA CB400SF 99-07 NC39 VTEC III* requires drilling of switch hole|* requires side cap (for 18mm ID)
- ...and more.
This is a change from Plating of the same type.On the LeftGrip side, there is a paper seal with the product number, ManufacturerMain and product name, which is still difficult to remove.If you could m...Read More - Fits:
- その他 Universal
- YAMAHA SR400 19-21
- YAMAHA SR400 19-21
reasonable price for this nice craft handle bar
fit my yamah sr400
easy to insall
but you need longer wires
send your bike to your bike shop to have this job done.Read More - Fits:
- YAMAHA TW225E 00- (Disc brake models) *Processing of switch hole is required|*It is necessary to change the throttle cable
- clutch cable and brake hose.
- YAMAHA TW200E 00- (Disc brake models) *Processing of switch hole is required|*It is necessary to change the throttle cable
- clutch cable and brake hose.
- YAMAHA TW200E -99 (Drum brake models) *Changing the throttle cable
- ...and more.
I chose this for the Handlebar of my YamahaTW200E 2JL.Compared to the OEM, it makes it easier to lean forward slightly and tighten the elbows.When I tried to lower my head and tighten my elbows to red...Read More - Fits:
- その他 Universal
- YAMAHA SR400 19-21
- YAMAHA SR400 19-21
The height and pull will be reasonable, so you will have a relaxed Position.When the OEMHandlebar is tilted forward, I tend to put my weight on the Handlebar, which results in unnatural handling.Thank...Read More - Fits:
- YAMAHA SR400 19-21
- YAMAHA SR400 19-21
I was searching for a different handle bar setup for my Honda Monkey 125 and settled on this style from Daytona. Because these handle bars are not made specifically for the Honda Monkey 125 you will n...Read More - Fits:
- YAMAHA TW225E 00- (Disc brake models) *Processing of switch hole is required|*It is necessary to change the throttle cable
- clutch cable and brake hose.
- YAMAHA TW200E 00- (Disc brake models) *Processing of switch hole is required|*It is necessary to change the throttle cable
- clutch cable and brake hose.
- YAMAHA TW200E -99 (Drum brake models) *Changing the throttle cable
- ...and more.
Used for APE 100Installed on Direct.comTop BridgeI hesitated with Type 1, but I decided to use Type 0 which is the closest to Straight!There is a Mini type in the type 1, and I was lost, but I think t...Read More - Fits:
- KAWASAKI ZEPHYRX *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
- KAWASAKI ZEPHYR400 *Required switch hole drilling process|*Required side cap (for inner diameter φ18mm)
- HONDA NC700S 12 (Excluding ABS and DCT models)*Processing of switch hole drilling required|*Side cap required (for inner diameter φ18mm)
- YAMAHA XJR400R 01-07 (RH02J)*Processing of switch hole drilling required|*Side cap (for inner diameter φ18mm)|*Please install the bar end upward.
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- ...and more.
[How is it used?I wanted to replace the Grip and Bar End while I was doing the Lever replacement, so I replaced the Handlebar too!Was the one you received as per Image?While slightly lower than OEM, n...Read More - Fits:
- YAMAHA SR400 01-17
I was able to use my accumulated Points.When I removed the packaging before installation, there were dents that looked like they had been poked with something hard and thin (like a slotted screwdriver...Read More - Fits:
- YAMAHA XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter)
- YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID)
- YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID)
- YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
- YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
- ...and more.
Replaced the Handlebar width to make it narrower for the VANVAN200 Custom.The Image is approximately half a fist inside and one handful down from OEM.As a result, it is easy to slip through and I am g...Read More - Fits:
- KAWASAKI ZRX400II *Requires drilling of switch hole|*Applicable side cap (for 18mm dia.)|*Cannot be installed on models 05 and later due to interference with the cowl.
- KAWASAKI W400 *Required Switch Hole Drilled
- KAWASAKI ZRX400 -04 *Processing to drill switch holes is required|* Required side cap (for 18mm I.D.)|*Not available for the models after 05 due to interference with the cowl.
- HONDA MONKEY 84-07 (Z50J-1600008-|AB27-1000001-1899999)*With Top Bridge H30 Holder or MONKEY Handle Holder required
- HONDA HORNET250 *Need to drill switch hole
- ...and more.
I reverse engineered it on my XJR1300.I was not satisfied with the position and appearance of the Tommaselli separate handlebar I had previously installed, so I changed to a Pipe Handlebar.This was th...Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING