- Fits:
- MOTO MORINI Corsaro 05-07
- YAMAHA V- Max 09-
- HONDA CBR 1000 RR 08-08
- DUCATI Sport 09-09
- DUCATI Sport GT 09-09
- ...and more.
The YZF-R1 came in wanting to be transitioned onto a track related bike so I went to work on the braking system. One of the first things I wanted to change was the annoying stock master cylinder. Obvi...Read More - Fits:
- APRILIA RSV1000R 04-08
- APRILIA RSV1000R 00-03
- APRILIA Tuono 02-05 with radial mount calipers
- DUCATI 999 S 03-06
- DUCATI Diavel 11-
- ...and more.
I was working on a bike that was being transitioned into a track bike. One of the first things I wanted to changer was the annoying stock master cylinder. Obviously, Brembo was the way to go. I decide...Read More - Fits:
- SUZUKI SV400S 98-99 [Model]SV400W/SW [FNO]VK53A-100001 or later [Location]Rear
- KAWASAKI ZXR750 93-95 [Model]ZX750L1/L2/L3 [FNO]ZX750J-030001 or later [Location]Rear
- SUZUKI BANDIT250 89-92 [Model]GSF250/N/ZM [FNO]GJ74A-100033 or later [Location]Rear
- SUZUKI RGV250 GAMMA 89 [Model]RGV250K/AK [FNO]VJ21A-117639 or later [Location]Rear
- SUZUKI RGV250 GAMMA 88 [Model]RGV250J [FNO]VJ21A-100001 or later [Location]Rear
- ...and more.
Having heard a lot of good things about the SBS brand of brake pads, I decided it was time to give them a go on a different model. This bike is one of my own which does brake heavy and thought I would...Read More - Fits:
- KAWASAKI ZRX1200 -09
- KAWASAKI ZRX1200 DAEG
Works well and looks nice on my 03 ZRX1200R. The only problem is you have to source your own hardware (bolts). I would purchase again.Read More - Fits:
- YAMAHA FZ400
- YAMAHA TW 200E 91 (Models 2JL0
- 4CS1
- 4CS2
- 4CS3
- ...and more.
I put Kijima blade breeder dust cap on my Ducati StreetFighter 1098 and Hayabusa 1300R replacement for stock cap (Hayabusa with Brembo caliper). The stock cap is easy to lose when repalce bracke fruid...Read More - Fits:
- YAMAHA BT 1100 02-06
- TRIUMPH Street Triple R 765 17-
- TRIUMPH Street Triple 12-16
- TRIUMPH Speed Triple S 1050 17-
- TRIUMPH Street Triple 07-11
- ...and more.
Bought this, along with the clutch master cylinder as an upgrade on the stock items. Simple to fit and easy to bleed due to the top mounted bleed nipple.
Great price from Webike, as cheap as some bre...Read More - Fits:
- HONDA CBR500R
- YAMAHA YZF1000 THUNDER ACE 96-00 R
- YAMAHA YZF600 THUNDER CAT 97-00 R
- YAMAHA ZEAL 91-94
- YAMAHA GRAND MAJESTY250 5VG [Where used] Right side
- ...and more.
2010년식 GSX-1250FA 순정 마스터 실린더 대용으로 설치하였습니다. 피팅은 완벽하게 잘맞고, 브레이크 조작감도 순정과 동일합니다.
다만, 브레이크액 리저브 탱크를 핸들에 고정시키는 볼트는 동봉되지 않아서 따로 구매해야 합니다. 나사산의 피치가 맞는 것을 찾는데 여러번의 시행착오를 겪었습니다. 제품은 매우 만족합니다.Read More - Fits:
- YAMAHA FZ400
- YAMAHA TW 200E 91 (Models 2JL0
- 4CS1
- 4CS2
- 4CS3
- ...and more.
我的摩托车是YAMAHA NMAX155,我在上次更换刹车油的时候把原厂的放空气橡皮冒弄坏了一直没有地方能买到,直到我在webike看到这个KIJIMA 放空气螺丝橡皮盖,这是一款通用的配件,适合大部分摩托车,红色的还比较好看。Read More - Fits:
- HONDA CBR500R
- YAMAHA YZF1000 THUNDER ACE 96-00 R
- YAMAHA YZF600 THUNDER CAT 97-00 R
- YAMAHA ZEAL 91-94
- YAMAHA GRAND MAJESTY250 5VG [Where used] Right side
- ...and more.
I rebuild my bike up. There were a lot of Brake Master Cylinder on the market but I was hesitant because I was dubious from their manufacturer. I found this online for my Honda Bros NT400J 1988. I'm h...Read More - Fits:
- KAWASAKI ZRX1200 -09
- KAWASAKI ZRX1200 DAEG
I think it is thicker and more rigid than OHLINSOEMSupport.It is also well made.Read More - Fits:
- HONDA CBR1000RR 04-15
- HONDA CBR600RR 03-15
- HONDA CBR900RR Fireblade 02-03
- HONDA CBR900RR Fireblade 00-01
- HONDA CR125 95-01
- ...and more.
I think the bolt itself is fine. However, the shape of the bolt is different from that of the OEM rotor bolt, so if the bolt is installed as is, the brake rotor will not be centered. I finally matched...Read More - Fits:
- SUZUKI RG400 85-87 Gamma Type:R
- SUZUKI RG500γ (Gamma) 85-86 Type:R
- SUZUKI RF400 93-97 R Type:R
- SUZUKI RF900 96-99 R Type:R
- SUZUKI RG250 γ 83 Type:WF
- ...and more.
Cheap, just cheapWhat could go wrong? It is so cheap that I think it is a good idea.But whatQuantity:I have used Set and have never had a problem.No Trouble with delamination etc.The effectiveness is ...Read More - Fits:
- KAWASAKI ZrX1200ZrX1200 DAEG 09-16
The Touch and Direct feel of the Brake will change.It looks better, and unlike OEM rubber, it is more durable.It is a standard product, but just replacing it with a mesh hose gives it a very good cust...Read More - Fits:
- SUZUKI GSX-R400 90-94 R/SP[Position]Rear [Compatibility]◎
- SUZUKI GSX-R400 88-89 j/r [part used]rear [fitment]○ ○
- SUZUKI GSX-R250/R 89 RK [part used]Rear [fitment]○ ○
- SUZUKI GSX-R1000 93-98 WP [part used]Rear [fitment]◎
- SUZUKI GSX-R1000 89-92 k/l/m [part used]rear [fitment]◎
- ...and more.
Mega alloy (M) Before using DAYTONA Hyper Sintered Pads (H) and this is a comparison with that.When I was using H, I could not jackknife even with four fingers.M is for 4-finger hanging (Quantity:2PCs...Read More - Fits:
- KAWASAKI ZrX1200ZrX1200 DAEG
- KAWASAKI ZRX1100
- KAWASAKI ZRX1200R
You can hide a cheapo Tank! It can be done with no processing and just one Bolt.Time required:5 minutesRead More - Fits:
- YAMAHA FZ400
- YAMAHA TW 200E 91 (Models 2JL0
- 4CS1
- 4CS2
- 4CS3
- ...and more.
Great product and quick delivery a pleasure to deal with, highly recommend. Great service from Webike Japan the product arrived to Australia in a few days, very happy!Read More - Fits:
- SUZUKI Impulse 400 94-98
- SUZUKI WOLF250 88-90
- SUZUKI Impulse 400 05-07
- SUZUKI Inazuma 400 97-02
- SUZUKI Impulse 400 99-00
- ...and more.
I used the Red Pad last time, but since I replaced it with the WaveRotor, it started to wear out faster, so I bought it from Repeat. I bought it at Repeat because it was worn out too fast since I repl...Read More - Fits:
- SUZUKI BANDIT400V 95-97 (GK7AA)[Place of use]Rear[Required number]1
- SUZUKI BANDIT400V 95-97 (GK7AA)[Used place]Front[Required number]1
- SUZUKI BANDIT400V 89-94 (GK75A)[Used place]Rear[Required number]1
- SUZUKI BANDIT400V 89-94 (GK75A)[Used place]Front[Required number]1
- SUZUKI BANDIT400 95-97 (GK7AA)[Place of use]Rear[Required number]1
- ...and more.
I usually use OEM, but this is the first time I'm using OEM. OEM is getting strange wear & rust even after applying CopperGrease. I wish they didn't rust. I will replace the pad when I replace it, as ...Read More - Fits:
- KAWASAKI ZXR250R 90 [Frame No.]ZX250A-301501 or later
- KAWASAKI ZXR400 89 [ZX400] [Frame No.]ZX400H-000001 or later
- KAWASAKI ZXR250 95 [Frame No.]ZX250C
- KAWASAKI ZXR250 99 [Frame No.]ZX250C-020001 or later
- KAWASAKI ZXR250R 89 [Frame No.]ZX250A-300001 or later
- ...and more.
I've been sticking with the Tokico 6 pods. This time I adopted CaliperOverhaul and baked paint instead of OEM. I think it's a good corrosion protection. I've heard that some people use seal tape to pr...Read More - Fits:
- YAMAHA FZ400
- YAMAHA TW 200E 91 (Models 2JL0
- 4CS1
- 4CS2
- 4CS3
- ...and more.
I used it on my DAYTONA air breeder, but it's too loose. I don't think it will come off while driving, but it's loose enough to prevent dust and dirt. The OEM breeder is not as loose as the DAYTONA, b...Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING