- Fits:
- KAWASAKI ER-6F 07-10
- KAWASAKI ER-4N 11-13
- KAWASAKI Z250 13-14
- KAWASAKI ZZR1400 (ZX-14) 06-11
- KAWASAKI ZZR1100/ZX-11 99-01
- ...and more.
The photo shows the connecting kit for a universal handlebar type, although the motorcycle fitment list showed only certain variants of Kawasakis. This led me to believe the listed Kawasaki models use...Read More - Fits:
- KAWASAKI ZZR400 01-06
- KAWASAKI NINJA250 13-21
- KAWASAKI ZX-10R 11-15
- KAWASAKI ZZ-R1100 99-01
- KAWASAKI ZZR1200 02-05
- ...and more.
I purchased the red color, but I would have liked it to be a little deeper red. As for performance, it is quite heavy and helps to reduce vibration.Read More - Fits:
- KAWASAKI VERSYS1000 12-14
- KAWASAKI NINJA1000 (Z1000SX) 11-14
- KAWASAKI NINJA2 Helmet50RR 08-12
- KAWASAKI NINJA400R (-2013) 11-13
- KAWASAKI NINJA400 (2014-) 14
- ...and more.
While other manufacturer's products have a single color for the large body, this one has a two-tone color and a good texture.However, it is not that heavy, so it may be better not to install it for vi...Read More - Fits:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI ZX10RR 17-20
- KAWASAKI ZX14R 12-20
- ...and more.
Introduced as dress-up parts.The price is a little high, but the texture is perfect.I would like to change the color of the cover depending on my mood.Read More - Fits:
- KAWASAKI ZRX1200R 01-08
- KAWASAKI ZRX1200DAEG 09-16
- KAWASAKI ZRX1100II 97-00
- KAWASAKI ZRX1100 97-00
- KAWASAKI Z800 13-16
- ...and more.
The vibration of the Handlebar becomes Small, and the footpeg is bothered, and there is an effect to a single machine and a high speed.Read More - Fits:
- KAWASAKI ZRX1200R 01-08
- KAWASAKI ZRX1200DAEG 09-16
- KAWASAKI ZRX1100II 97-00
- KAWASAKI ZRX1100 97-00
- KAWASAKI Z800 13-16
- ...and more.
There is a sense of luxury, and I think that it is quite good. The weight is also heavier than the NORMAL, and I think it becomes a vibration measure.Read More - Fits:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI ZX10RR 17-20
- KAWASAKI ZX14R 12-20
- ...and more.
我的车子是KAWASAKI的NINJA 400,2019年款的。这次换了手柄和Bar End。POSH的Bar End要比原厂的沉很多,不愧名字叫Heavy Bar End。换完后效果很明显,车把的震动比原厂的小了很多。另外,外观也非常好看,和车身的颜色很搭配。
----------------------------------------------
My car is 400, ...Read More - Fits:
- KAWASAKI ZZR400 01-06
- KAWASAKI NINJA250 13-21
- KAWASAKI ZX-10R 11-15
- KAWASAKI ZZ-R1100 99-01
- KAWASAKI ZZR1200 02-05
- ...and more.
This is a replacement from Posh's Ultra bar heavy end.As you wrote, the Bolt is too long to put on the OEM Handlebar of the ZX-14R.When I installed it, I used Bolt of Posh which I had been using becau...Read More - Fits:
- KAWASAKI 1400GTR 08-16
- KAWASAKI The stock bar end is fixed with M8 bolts
- KAWASAKI GPZ900R 91-03
- KAWASAKI NINJA400R 11-13
- KAWASAKI Ninja ZX-14R 12-20
- ...and more.
I installed it on a 2020 Ninja1000SX.Master cylinder tank cap [NISSINΦ59] And purchased at the same time asThe Handlebar area was unified.I liked the shape and look of it, but the Weight was too light...Read More - Fits:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI ZX10RR 17-20
- KAWASAKI ZX14R 12-20
- ...and more.
Because the weight is heavier than NORMAL, the burden of hand shivering by the vibration reduction of Handlebar becomes less. Because the color comes off soon, it is better to avoid direct sunlight fo...Read More - Fits:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI ZX14R 12-20
- KAWASAKI ZX10RR 17-20
- ...and more.
I installed it in ZrX1200ZrX1200 DAEG, but the appearance was not good. If you go with a calm atmosphere, I think NORMAL is enough, but the feeling of customization increases at once by exchanging it.Read More - Fits:
- KAWASAKI 1400GTR 08-16
- KAWASAKI The stock bar end is fixed with M8 bolts
- KAWASAKI GPZ900R 91-03
- KAWASAKI NINJA400R 11-13
- KAWASAKI Ninja ZX-14R 12-20
- ...and more.
I bought it because it looks so coolI asked my favorite motorcycle shop to install it when they were working on another projectI've also included before and after pictures for comparisonIt's a dress-u...Read More - Fits:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI ZX10RR 17-20
- KAWASAKI ZX14R 12-20
- ...and more.
The vibration of the Handlebar was terrible, so I changed it for a test It didn't change, but the vibration was reduced If it gets scratched, only the Outer can be replaced, so it might be friendly to...Read More - Fits:
- KAWASAKI ZZR1400 06-11
- KAWASAKI Z900RS CAFE
- KAWASAKI Z900RS
- KAWASAKI ZX-9R 99-03
- KAWASAKI ZZR1200 02-05
- ...and more.
I bought a slightly lighter Bar End from SSK, but it's no good with a lot of numbness from the vibrationI bought the book Bar End, which is a little heavier than NORMALAfter using it, I didn't care so...Read More - Fits:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI ZX10RR 17-20
- KAWASAKI ZX14R 12-20
- ...and more.
I bought this one to prevent vibration because I lost the weight when I replaced the Handlebar I installed it in combination with the Heavy weight Nut As a result, the vibration is greatly reduced and...Read More - Fits:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI ZX10RR 17-20
- KAWASAKI ZX14R 12-20
- ...and more.
When I bought the Z 800, due to the storage location, I wanted to reduce the Handlebar width as much as possible so I prepared a Compact Bar End, but at the time I thought about various things and eve...Read More - Fits:
- KAWASAKI 1400GTR 08-16
- KAWASAKI The stock bar end is fixed with M8 bolts
- KAWASAKI GPZ900R 91-03
- KAWASAKI NINJA400R 11-13
- KAWASAKI Ninja ZX-14R 12-20
- ...and more.
It is nice to have this unified sense of Design in this series. I think that it fits well with the dark Body. I'm also placing Oil Feller Cap now.Read More - Fits:
- KAWASAKI ZZR1400 06-11
- KAWASAKI ZZR1200 02-05
- KAWASAKI ZX-9R 99-03
- KAWASAKI ZX-7RR 96-97
- KAWASAKI ZX-7R 00-02
- ...and more.
I was dissatisfied with the OEM's Bar End but by changing the appearance.. Because there are more people attaching POSH, I dared to SSK. Weight is lighter than OEM but vibration etc etc. There is ...Read More - Fits:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI ZX10RR 17-20
- KAWASAKI ZX14R 12-20
- ...and more.
Anyway it's heavy ?? When you open it and take it with you, you come screaminglyThere was 280 g in the description on Manufacturer but it actually exceeded 300 g when weighing it. It seems likely ...Read More - Fits:
- KAWASAKI
- KAWASAKI
- KAWASAKI
- KAWASAKI ZX10RR 17-20
- KAWASAKI ZX14R 12-20
- ...and more.
Since I can not do the installation on my own, my acquaintance did it.As I looked at the other imprints and took off the items from the OEM there was a thing called Large strange so I prepared a high-...Read More
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING